Taiwan AMAC Clamp Ind. Co., Ltd.
Air drive booster pump Air Swing Clamp Cylinder Hydraulic Sequence Valve Hydraulic Swing Clamp PTA Movable Steel Ball Positioning Screw Hydraulic Thin-type Cylinder Hydraulic Supporting Cylinder
AMAC Pneumatic and Hydraulic Clamp Components Automated Machine Accessories Clamps

Air drive booster - Air Pump Three Circuit

Air drive booster pump
Product Introduction
• Pmax:6kg/cm²
• The body of the booster cylinder has the same actuating function as the single circuit. The output hydraulic pressure includes three circuit. The P port on each circuit is equipped with a single direction valve, so that each circuit can work individually.
• Optional Accessories: Fluid level switch in oil tank EP-125FA
• Modular pressure reducing valve (Max operation pressure 210kg/cm²)
MBRV-02P-1L:3~35kg/cm²
MBRV-02P-2L:7~70kg/cm²
MBRV-02P-3L:35~140kg/cm²
• Pressure sensor : Made in TAIWAN
JC-PS-02L:10~230kg/cm²
JC-PS-02LL:5~60kg/cm²
• Pressure sensor : Made in ITALY
PS-021:20~50kg/cm²
PS-022:50~80kg/cm²
PS-023:50~150kg/cm²
Specification
Fluid Filtered air
Max operation pressure 6 Kg/cm²
Boost pressure rate 06 10 13 16 25 44
Air pressure supply6 Kg/cm² 15.1 10.8 9.1 6.5 4.9 3.2
Hydraulic fluid expelledL/min
Oil tank capacity 10 L
Oil ISO-VG68
Order Code
Air drive booster pump Order Code
1 Series ADB
2 Boost pressure rate 06 , 10 , 13 , 16 , 25 , 44
3 Control type Three-circuit manifold plate with ISO specification.
4 Direction change valve type Single Head : 2B2-02,
Double Head : 2D2-02,3C2-02
5 Coil type AC110V,AC220V,DC24V
6 The pressure reducing valve model MBRV1,MBRV2,MBRV3
Remark: A2 two circuits and A3 three circuits that commonly use an oil tank.
Notice
• Use ISO-VG68 hydraulic oil. Be sure to fill proper amount of hydraulic oil into the oil tank before operation. • Periodically inspect hydraulic oil quality to prevent affection on normal operation and parts life. • In case air system can’t work, remove the air valve but do not break down. Use an air gan to clean the internal direction change ports. • There is a thin type bronze silencer on the aluminum body of air cylinder. If it is blocked by suction of powder dust, it may impede the motion of the piston of air cylinder. When such problem occurs, remove it for cleaning or replacing. • If air system works continuously, but hydraulic pressure can’t boost, it means oil seal is damaged causing internal leakage.